HOME        ABOUT US        CONVEYOR BELTING PRODUCTS          BAKERY/SLICING BLADES   CONVEYOR BELT FASTENERS   CONVEYOR ROLLERS   CURVE / CORNER BELTS   FABRICATED BELTS   FLAT BELTS   PROFILES   PLASTIC MODULAR BELTS   PTFE BELTS   SEALED EDGE BELTS   TRANSMISSION BELTS   WIRE BELTS   WIRE MESH BELTS        BELT VULCANIZING & JOINING SERVICE        CONTACT US        OUR LOCATION        USEFUL LINKS        NEWS ITEMS        F & P Fogarty and Sons Unit 82, Baldoyle Industrial Estate, Dublin 13, Ireland Phone: +353 (01) 839 1991 Fax: +353 (01) 832 2959 Email:  info@fogartybelting.com        Members of:        Powered by go2web          Gorflex Plate Fasteners                You are here:  >>  Conveyor Belt Fasteners  >>  Gorflex Plate Fasteners          Made of zinc coated carbon steel or wear resistant (WR) steel, bichromated ( top and bottom plates).        5 sized to meet to requirements of most applications.        Each fastener set contains 1 top plate, 1 bottom plate, and 2 bolts.               Type Belt Thickness Range Maximum Belt Working Tension Minimum Pulley Diameter 140 3/16 to 7/16" 5 to 11 mm 225 PIW 40 KN/m 10" 250mm 190 5/16 to 9/16" 8 to 14 mm 330 PIW 60 KN/m 14" 360mm 1½ 7/16 to 43/64" 11 to 17 mm 300 PIW 50 KN/m 14" 360mm 2 43/64" to 53/64" 14 to 21 mm 440 PIW 75 KN/m 24" 610mm 2½ 3/4 to 1" 19 to 25 mm 450 PIW 80 KN/m 39" 1000mm          Installation Tools for Gorflex Fastners        Each installation tool is available in 3 types:        Type A: For Gorflex 140 and 190 fastners Type B: For Gorflex 1½ and 2 fastners Type C: For Gorflex 2½ fastners               Punch, Wrench, and Power Tool: Can be used manually or with any air or tool (with ½" drive).        Bold Breaker (pair): To remove bolt exess when completing the splice.        Template: To ensure precise hole placement, templates are available in these widths: 600 mm, 900 mm, 1050 mm, 1200 mm               For further information, please phone us at (01) 839 1991 or  email us.