HOME        ABOUT US        CONVEYOR BELTING PRODUCTS          BAKERY/SLICING BLADES   CONVEYOR BELT FASTENERS   CONVEYOR ROLLERS   CURVE / CORNER BELTS   FABRICATED BELTS   FLAT BELTS   PROFILES   PLASTIC MODULAR BELTS   PTFE BELTS   SEALED EDGE BELTS   TRANSMISSION BELTS   WIRE BELTS   WIRE MESH BELTS        DOWNLOADS        BELT VULCANIZING & JOINING SERVICE        CONTACT US        OUR LOCATION        USEFUL LINKS        F & P Fogarty and Sons Unit 82, Baldoyle Industrial Estate, Dublin 13, Ireland Phone: +353 (01) 839 1991 Fax: +353 (01) 832 2959 Email:  info@fogartybelting.com        Members of:        Powered by go2web          Plastic Modular Belts Image Gallery: Click on any image to see a larger version.          STRAIGHT 12,5 mm        The S.12 "Minipitch" is now available. The module partition for this Minipitch belt is 12,5 mm. To begin with, we have concentrated on a very open version of the Minipitch belt. This has already proven very applicable in the bakery industry.          STRAIGHT 25 mm        The S.25 is a modular constructed belt series, which is suitable for light transportation. The module partition is 25 mm and is available in 50 mm to 4000 mm. At the moment, there are 14 types of belts with different surfaces within the series. Both open and closed belts with structure surfaces as well as two-component surface are available. Accessories, such as side guards and flights can be delivered for this series.          STRAIGHT 50 mm        The S.50 is a modular constructed belt, which is suitable for heavy transportation. The module partition is 50 mm and is available in 50 mm to 4000 mm. At the moment, there are 14 types of belts with different surfaces within this series. Both open and closed belts with structure surfaces as well as two-component surface are available. Accessories, such as side guards, bended and straight flights etc. can be delivered for this series.          Radius Belt        20 years in spiral and radius belt business has resulted in a range of 25 and 50 mm pitch belts going in curves. Belts suitable for both J-curves and S-curves are available. The 25 mm range has a market low collapse factor (from 1,5:1 x belt width) without compromising the pulling force and product placement. Side guards, line separators, friction top and hold-downs/hooks are all available in this range. The 50 mm series is widely used in heavy duty spirals. The reinforced outer links gives a very high pulling force without any steel-to-steel contact.                                     For further information, please phone us at (01) 839 1991 or  email us.