F & P Fogarty offers a variety of precision-formed balanced weave meshes to provide various opening sizes for proper product support or airflow. Together with its drive components, sprockets, filler rolls and support bearings, our belt is a positively driven belt that provides true tracking without a costly chain edge construction. Close product transfers are possible because belt tension is kept to a minimum.
Balanced Spiral Belting.
The most common design for friction driven belts. Straight running because of the alternate right- and left-hand coils, with crimped rods to retain the original belt shape. Available with apertures from as small as 2.4mm.
Balanced Spiral Belting:
The most common design for friction driven belts. Straight running because of the alternate right- and left-hand coils, with crimped rods to retain the original belt shape. Available with apertures from as small as 2.4mm.
Chain Link Belting:
This simplest of belt designs is available with either knuckled or welded selvedges. Suitable for collapsible screens and applications where tracking is not critical.
Rod Reinforced Belting.
This belt features heavy-duty weaves which are most commonly used in the heat treatment industry at temperatures up to 1150 degrees C.
Flat Spiral Belting.
Available with a smotth laddered or welded selvedge. Used in bakeries and washing plants.
Chain Driven Belting.
When a positive drive is required, the mesh can be fitted with sidechains. Suitable for inclined travel and when heavier loads are to be carried. A wide variety of chains are available.
Ladder Belting.
Most commonly used in bakeries. This sprocket driven belting can be used for bends as well as straight running applications.
Honeycomb Belting.
Honeycomb belting. This positively driven belting is used in a wide range of industries. A heavy duty belt with an open area that is particularly useful in drainage or cooling applications.
For further information, please phone us at (01) 839 1991 oremail us.
